Web Server Commands
ip https port
The ip https port Global Configuration mode command specifies the TCP port used by the
server to configure the device through the Web browser. To return to the default configuration,
use the no form of this command.
Syntax
ip https port port-number
no ip https port
Parameters
■
port-number — Port number to be used by the HTTP server. (Range: 0-65535)
Default Setting
The default port number is 443.
Command Mode
Global Configuration mode
Command Usage
Specifying 0 as the port number effectively disables HTTPS access to the device.
Example
The following command configures the https port number to 100.
Console(config)#Console(config)# ip https port 100
29-4
www.hp.com
CLI Reference Guide