show dot1x advanced
The show dot1x advanced Privileged EXEC mode command displays 802.1x advanced features
for the device or specified interface.
Syntax
show dot1x advanced [ethernet interface]
Parameters
■
interface — Valid Ethernet port. (Full syntax: port)
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following command displays 802.1x advanced features for the device.
Console# show dot1x advanced
Guest VLAN: 2
Unauthenticated VLANs: 91,92
Interface
---------
1/e1
1/e2
Console# show dot1x advanced ethernet 1/e1
Interface
---------
1/e1
Single host parameters
Violation action: Discard
Trap: Enabled
Trap frequency: 100
Status: Single-host locked
Violations since last trap: 9
HP PC Blade Switch CLI Reference Guide
Multiple Hosts
--------------
Disabled
Enabled
Multiple Hosts
--------------
Disabled
www.hp.com
802.1x Commands
Guest VLAN
----------
Enabled
Disabled
Guest VLAN
----------
Enabled
2-23