Rmon Collection History - HP Bc1500 - BladeSystem - Blade PC Reference Manual

RMON Commands

rmon collection history

The rmon collection history Interface Configuration (Ethernet, port-channel) mode command
enables a Remote Monitoring (RMON) MIB history statistics group on an interface. To remove a
specified RMON history statistics group, use the no form of this command.
Syntax
rmon collection history index [owner ownername] [buckets bucket-number] [interval seconds]
no rmon collection history index
Parameters
■
index — Specifies the statistics group index. (Range: 1-65535)
■
ownername — Specifies the RMON statistics group owner name.
■
bucket-number — Number of buckets specified for the RMON collection history group of
statistics. If unspecified, defaults to 50. (Range:1-65535)
■
seconds — Number of seconds in each polling cycle. (Range: 1-3600)
Default Setting
RMON statistics group owner name is an empty string.
Number of buckets specified for the RMON collection history statistics group is 50.
Number of seconds in each polling cycle is 1800.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
Command Usage
Cannot be configured for a range of interfaces (range context).
Example
The following command enables a Remote Monitoring (RMON) MIB history statistics group on
Ethernet port 1/e1 with index number 1 and a polling interval period of 2400 seconds.
Console(config)# interface ethernet 1/e1
Console(config-if)# rmon collection history 1 interval 2400
20-4 www.hp.com HP PC Blade Switch CLI Reference Guide