Show Ip Igmp Snooping Groups - HP Bc1500 - BladeSystem - Blade PC Reference Manual

show ip igmp snooping groups

The show ip igmp snooping groups User EXEC mode command displays multicast groups
learned by IGMP snooping.
Syntax
show ip igmp snooping groups [vlan vlan-id] [address ip-multicast-address]
Parameters
■
vlan-id — VLAN number.
■
ip-multicast-address — IP multicast address.
Default Setting
This command has no default configuration.
Command Mode
User EXEC mode
Command Usage
To see the full multicast address table (including static addresses) use the show bridge multicast
address-table Privileged EXEC command.
Example
The following command shows IGMP snooping information on multicast groups.
Console> show ip igmp snooping groups
VLAN
----
1
19
IGMP Reporters that are forbidden statically:
---------------------------------------------
VLAN
----
1
HP PC Blade Switch CLI Reference Guide
IP Address
-----------------
224-239.130|2.2.3
224-239.130|2.2.8
IP Address
-----------------
224-239.130|2.2.3
www.hp.com
Querier Ports
------- ----------
Yes 1/e1, 2/e2
Yes 1/e9-e11
Ports
-----
1/e19
IGMP Snooping Commands
10-9