Radius-Server Source-Ip - HP Bc1500 - BladeSystem - Blade PC Reference Manual
Blade switch
Hide thumbs
Also See for Bc1500 - BladeSystem - Blade PC:
- User manual (216 pages) ,
- Setup and installation manual (149 pages) ,
- Supplementary manual (45 pages)
Table of Contents
Advertisement
radius-server source-ip
The radius-server source-ip Global Configuration mode command specifies the source IP
address used for communication with RADIUS servers. To return to the default configuration,
use the no form of this command.
Syntax
radius-server source-ip source
no radius-source-ip source
Parameters
■
source — Specifies a valid source IP address.
Default Setting
The source IP address is the IP address of the outgoing IP interface.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following command configures the source IP address used for communication with
RADIUS servers to 10.1.1.1.
Console(config)# radius-server source-ip 10.1.1.1
HP PC Blade Switch CLI Reference Guide
www.hp.com
RADIUS Commands
19-5
Advertisement
Table of Contents
