service-acl
The service-acl Interface Configuration mode command applies an ACL to the input interface.
To detach an ACL from an input interface, use the no form of this command.
Syntax
service-acl {input acl-name}
no service-acl {input}
Parameters
■
acl-name — Specifies the ACL to be applied to the input interface.
Default Setting
This command has no default configuration.
Command Mode
Interface (Ethernet, port-channel) Configuration mode.
Example
The following command binds (services) an ACL to VLAN 2.
Console(config)# interface vlan 2
Console(config-if)# service-acl input macl1
HP PC Blade Switch CLI Reference Guide
www.hp.com
ACL Commands
4-11