Configuration Commands - HP Bc1500 - BladeSystem - Blade PC Reference Manual

Blade switch
Hide thumbs Also See for Bc1500 - BladeSystem - Blade PC:
Table of Contents

Advertisement

To access the Privilege Exec mode, open a new console session with the user name and password
"admin." The system will now display the "Console#" command prompt. You can also enter the
Privileged Exec mode from within Normal Exec mode. To enter the Privileged Exec mode, enter
the following user names and passwords:
Username: admin
Password: [admin login password]
CLI session with the PC Blade Switch is opened.
To end the CLI session, enter [Exit].
Console#
Username: guest
Password: [guest login password]
CLI session with the PC Blade Switch is opened.
To end the CLI session, enter [Exit].
Console#enable
Password: [privileged level password]
Console#

Configuration Commands

Configuration commands are privileged level commands used to modify switch settings. These
commands modify the running configuration only and are not saved when the switch is rebooted.
To store the running configuration in non-volatile storage, use the copy running-config
startup-config command.
The configuration commands are organized into different modes:
Global Configuration — These commands modify the system level configuration, and
include commands such as hostname and snmp-server community.
Access Control List Configuration — These commands are used for packet filtering.
DHCP Configuration — These commands are used to configure the DHCP server.
Interface Configuration — These commands modify the port configuration such as
speed-duplex and negotiation.
Line Configuration — These commands modify the console port and Telnet configuration,
and include command such as parity and databits.
Router Configuration — These commands configure global settings for unicast and multicast
routing protocols.
VLAN Configuration — Includes the command to create VLAN groups.
Multiple Spanning Tree Configuration — These commands configure settings for the
selected multiple spanning tree instance.
HP PC Blade Switch CLI Reference Guide
www.hp.com
Command Line Interface
1-5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bladesystem pc

Table of Contents