Permit (Ip) - HP Bc1500 - BladeSystem - Blade PC Reference Manual

Blade switch
Hide thumbs Also See for Bc1500 - BladeSystem - Blade PC:
Table of Contents

Advertisement

ACL Commands

permit (IP)

The permit IP-Access List Configuration mode command permits traffic if the conditions
defined in the permit statement match.
Syntax
permit {any | protocol} {any | {source source-wildcard}} {any | {destination
destination-wildcard}} [dscp dscp number | ip-precedence ip-precedence]
permit-icmp {any | {source source-wildcard}} {any | {destination destination-wildcard}} {any
| icmp-type} {any | icmp-code} [dscp number | ip-precedence number]
permit-igmp {any | {source source-wildcard}} {any | {destination destination-wildcard}} {any
| igmp-type} [dscp number | ip-precedence number]
permit-tcp {any | { source source-wildcard}} {any | source-port} {any |{ destination
destination-wildcard}} {any | destination-port} [
list-of-flags]
permit-udp {any | { source source-wildcard}} {any | source-port} {any | {destination
destination-wildcard}} {any | destination-port} [dscp number | ip-precedence number]
Parameters
source — Specifies the source IP address of the packet. Specify any to indicate IP address
0.0.0.0 and mask 255.255.255.255.
source-wildcard — Specifies wildcard to be applied to the source IP address. Use 1s in bit
positions to be ignored. Specify any to indicate IP address 0.0.0.0 and mask
255.255.255.255.
destination — Specifies the destination IP address of the packet. Specify any to indicate IP
address 0.0.0.0 and mask 255.255.255.255.
destination-wildcard — Specifies wildcard to be applied to the destination IP address. Use 1s
in bit positions to be ignored. Specify any to indicate IP address 0.0.0.0 and mask
255.255.255.255.
protocol — Specifies the abbreviated name or number of an IP protocol. (Range: 0-255)
The following table lists protocols that can be specified:
IP Protocol
Internet Control Message Protocol
Internet Group Management Protocol
IP in IP (encapsulation) Protocol
Transmission Control Protocol
Exterior Gateway Protocol
Interior Gateway Protocol
User Datagram Protocol
Host Monitoring Protocol
Reliable Data Protocol
Inter-Domain Policy Routing Protocol
4-2
dscp
number | ip-precedence number] [flags
Abbreviated Name
icmp
igmp
ipinip
tcp
egp
igp
udp
hmp
rdp
idpr
www.hp.com
HP PC Blade Switch CLI Reference Guide
Protocol Number
1
2
4
6
8
9
17
20
27
35

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bladesystem pc

Table of Contents