Switchport General Acceptable-Frame-Type Tagged-Only - HP Bc1500 - BladeSystem - Blade PC Reference Manual
Blade switch
Hide thumbs
Also See for Bc1500 - BladeSystem - Blade PC:
- User manual (216 pages) ,
- Setup and installation manual (149 pages) ,
- Supplementary manual (45 pages)
Table of Contents
Advertisement
switchport general acceptable-frame-type tagged-only
The switchport general acceptable-frame-type tagged-only Interface Configuration mode
command discards untagged frames at ingress. To return to the default configuration, use the no
form of this command.
Syntax
switchport general acceptable-frame-type tagged-only
no switchport general acceptable-frame-type tagged-only
Parameters
There are no parameters for this command.
Default Setting
All frame types are accepted at ingress.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
Command Usage
There are no user guidelines for this command.
Example
The following commands configure Ethernet port 1/e16 to discard untagged frames at ingress.
Console(config)# interface ethernet 1/e16
Console(config-if)# switchport general acceptable-frame-type tagged-only
HP PC Blade Switch CLI Reference Guide
www.hp.com
VLAN Commands
28-13
Advertisement
Table of Contents
