Qos Priority Cos Configuration; Qos Priority Cos Queue Configuration - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Interface Manual

Table 166 IP Routing General Configuration controls
Control
IP Destination Re-ARP Interval (2-
120 minutes)
*Router ID
* indicates fields that are available only on the GbE2c Layer 2/3 Ethernet Blade Switch.

QoS Priority CoS Configuration

To display the following form, select QoS > 802.1p > Priority - CoS.
This form summarizes the QoS Priority – Class of Service parameters. Select a priority value to view the CoSQ
For Priority form.

QoS Priority CoS Queue Configuration

To display the following form, go to the Priority – CoS form, and select a priority value.
The following table describes the CoSQ For Priority configuration controls:
Table 167 CoSQ For Priority Configuration controls
Control
CoSQ (0-1)
Description
Sets the re-ARP period in minutes. The switch periodically sends ARP (Address Resolution
Protocol) requests to refresh its address database. This command is used for setting the
interval between ARP refreshes of the next IP address in the database. The default interval
is 10 minutes.
Configures the router ID.
Description
Maps the 802.1p priority of to the Class of Service queue (CoSq) priority. Enter the Class of
Service queue (0-1) that handles the matching traffic.
Configuring the switch 198