Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 355

op
Syntax
Release Information
Description
Options
Additional Information
Required Privilege
Level
Related
Documentation
List of Sample Output
Copyright © 2010, Juniper Networks, Inc.
op filename
<detail>
<argument-name argument-value>
<key (md5 | sha-256 | sha1) key-value
<url url>
Command introduced in Junos OS Release 7.6.
Command introduced in Junos OS Release 9.0 for EX Series switches.
option introduced in Junos OS Release 10.0.
key
option introduced in Junos OS Release 10.0.
url
Execute an op script stored in one of the following locations:
On the router or switch in the
At a remote URL
detail —(Optional) Display detailed output.
argument-name argument-value
For each argument you include on the command line, you must specify a
corresponding value for the argument.
key (md5 | sha-256 | sha1) key-value
hash to verify the integrity of the script. You can include the
checksum statement is included at the
level.
—(Optional) Specify a URL where the script is located.
url url
For more information about Junos op scripts, see the Junos OS Configuration and
Operations Automation Guide.
maintenance
Executing an Op Script in the Junos OS Configuration and Operations Automation Guide
Executing an Op Script from a Remote Site in the Junos OS Configuration and Operations
Automation Guide
checksum
file checksum md5 on page 440
file checksum sha-256 on page 442
file checksum sha1 on page 441
op on page 252
Chapter 17: Operational Commands for System Setup
directory
/var/db/scripts/op
—(Optional) Specify one or more arguments to the script.
—(Optional) With the <url>
[edit system scripts op file filename]
option, specify a checksum
option if the
<key>
hierarchy
251