Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 351

Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Copyright © 2010, Juniper Networks, Inc.
specific T1600 router that is connected to the TX Matrix Plus router. Replace
with a value from through
0
local —(EX4200 switches only) (Optional) Clear all halt or reboot requests on the local
Virtual Chassis member.
—(EX4200 switches only) (Optional) Clear all halt or reboot requests
member member-id
on the specified member of the Virtual Chassis configuration. Replace
with a value from 0 through 9.
—(TX Matrix routers only) (Optional) Clear all halt or reboot requests for the TX Matrix
scc
router (or switch-card chassis).
sfc number —(TX Matrix Plus routers only) (Optional) Clear all halt or reboot requests for
the TX Matrix Plus router (or switch-fabric chassis). Replace
maintenance
request system reboot on page 115
clear system reboot on page 248
clear system reboot (TX Matrix Router) on page 248
When you enter this command, you are provided feedback on the status of your request.
Chapter 17: Operational Commands for System Setup
.
3
number
member-id
with .
number 0
247