Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 421

Required Privilege
Level
List of Sample Output
show system software show system software
Copyright © 2010, Juniper Networks, Inc.
for a specific T1600 router that is connected to the TX Matrix Plus router. Replace
with a value from
number
local —(EX4200 switches only) (Optional) Display the system software running on the
local Virtual Chassis member.
—(EX4200 switches only) (Optional) Display the system software
member member-id
running on the specified member of the Virtual Chassis configuration. Replace
member-id with a value from 0 through 9.
—(Routing matrix only) (Optional) Display the system software running on a TX Matrix
scc
router (or switch-card chassis).
sfc —(TX Matrix Plus routers only) (Optional) Display system software information for
the TX Matrix Plus router (or switch-fabric chassis).
maintenance
show system software on page 317
show system software (TX Matrix Plus Router) on page 318
user@host> show system software
Information for jbase:
Comment:
JUNOS Base OS Software Suite [7.2R1.7]
Information for jcrypto:
Comment:
JUNOS Crypto Software Suite [7.2R1.7]
Information for jdocs:
Comment:
JUNOS Online Documentation [7.2R1.7]
Information for jkernel:
Comment:
JUNOS Kernel Software Suite [7.2R1.7]
Information for jpfe:
Comment:
JUNOS Packet Forwarding Engine Support (M20/M40) [7.2R1.7]
Information for jroute:
Comment:
JUNOS Routing Software Suite [7.2R1.7]
Information for junos:
Chapter 17: Operational Commands for System Setup
through .
0 3
317