Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 374

Complete Software Guide for Junos
Output Fields
request system reboot request system reboot
request system reboot
(at 2300)
request system reboot
(in 2 Hours)
request system reboot
(Immediately)
request system reboot
(at 1:20 AM)
270
®
OS for EX Series Ethernet Switches, Release 10.4
request system reboot (Immediately) on page 270
request system reboot (at 1:20 AM) on page 270
When you enter this command, you are provided feedback on the status of your request.
user@host> request system reboot
Reboot the system ? [yes,no] (no)
user@host> request system reboot at 2300 message ?Maintenance time!?
Reboot the system ? [yes,no] (no) yes
shutdown: [pid 186]
*** System shutdown message from root@berry.network.net ***
System going down at 23:00
The following example, which assumes that the time is 5 PM (17:00), illustrates
three different ways to request the system to reboot in two hours:
user@host> request system reboot at +120
user@host> request system reboot in 120
user@host> request system reboot at 19:00
user@host> request system reboot at now
To reboot the system at 1:20 AM, enter the following command. Because 1:20 AM is
the next day, you must specify the absolute time.
user@host> request system reboot at 06060120
request system reboot at 120
Reboot the system at 120? [yes,no] (no) yes
Copyright © 2010, Juniper Networks, Inc.