Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 384

Complete Software Guide for Junos
Description
Options
280
®
OS for EX Series Ethernet Switches, Release 10.4
option added in Junos OS Release 7.4.
dynamic-flow-capture
option added in Junos OS Release 7.5.
dlsw
event-processing option added in Junos OS Release 7.5.
option added in Junos OS Release 7.5.
ppp
option added in Junos OS Release 8.0.
l2ald
link-management option added in Release 8.0.
option added in Junos OS Release 8.4.
pgcp-service
Command introduced in Junos OS Release 9.0 for EX Series switches.
sbc-configuration-process
services pgcp gateway option added in Junos OS Release 9.6.
and options introduced for the TX Matrix Router in Junos OS Release 9.6.
sfc all-sfc
Restart a Junos OS process.
CAUTION: Never restart a software process unless instructed to do so by a
customer support engineer. A restart might cause the router or switch to drop
calls and interrupt transmission, resulting in possible loss of data.
—Same as .
none gracefully
—(Optional) Restart the configuration management process that
adaptive-services
manages the configuration for stateful firewall, Network Address Translation (NAT),
intrusion detection services (IDS), and IP Security (IPsec) services on the Adaptive
Services PIC.
all-chassis —(TX Matrix and TX Matrix Plus routers only) (Optional) Restart the software
process on all chassis.
—(TX Matrix and TX Matrix Plus routers only) (Optional) For a TX Matrix router,
all-lcc
restart the software process on all T640 routers connected to the TX Matrix router.
For a TX Matrix Plus router, restart the software process on all T1600 routers
connected to the TX Matrix Plus router.
—(TX Matrix Plus routers only) (Optional) For a TX Matrix Plus router, restart the
all-sfc
software processes for the TX Matrix Plus router (or switch-fabric chassis).
audit-process —(Optional) Restart the RADIUS accounting process.
—(EX Series switch only) (Optional) Restart the autoinstallation process.
autoinstallation
chassis-control —(Optional) Restart the chassis management process.
—(Optional) Restart the class-of-service (CoS) process, which controls
class-of-service
the router's or switch's CoS configuration.
database-replication —(EX Series switch only) (Optional) Restart the database replication
process.
option added in Junos OS Release 9.5.
Copyright © 2010, Juniper Networks, Inc.