Traceoptions (Sbc Configuration Process) - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

traceoptions (SBC Configuration Process)

Syntax
Hierarchy Level
Release Information
Description
Options
Copyright © 2010, Juniper Networks, Inc.
traceoptions {
file filename <files number> <match regex> <size size>
<world-readable | no-world-readable>;
flag flag;
}
[edit system processes sbc-configuration-process]
Statement introduced in Junos OS Release 9.5.
Statement introduced in Junos OS Release 9.5 for EX Series switches.
Configure trace options for the session border controller (SBC) process of the border
signaling gateway (BSG).
—Name of the file that receives the output of the tracing operation. Enclose
file filename
the name in quotation marks. All files are placed in the directory
include the following file options:
—(Optional) Maximum number of trace files. When a trace file named
files number
reaches its maximum size, it is renamed
trace-file
on, until the maximum number of trace files is reached. Then the oldest trace file is
overwritten.
If you specify a maximum number of files, you must also specify a maximum file size
with the option and a filename.
size
Range: 2 through 1000
Default: 3 files
match regex —(Optional) Refine the output to include lines that contain the regular
expression.
—(Optional) Disable unrestricted file access.
no-world-readable
—(Optional) Maximum size of each trace file, in kilobytes (KB), megabytes
size size
(MB), or gigabytes (GB). When a trace file named
renamed . When the trace-file again reaches its maximum size,
trace-file.0
is renamed and
trace-file.1
continues until the maximum number of trace files is reached. Then the oldest trace
file is overwritten. If you specify a maximum file size, you also must specify a maximum
number of trace files with the files option and filename.
Syntax: xk to specify KB, xm
Range: 10 KB through 1 GB
Default: 128 KB
—(Optional) Enable unrestricted file access.
world-readable
Chapter 16: Configuration Statements for System Setup
trace-file.0
trace-file
is renamed
trace-file trace-file.0
to specify MB, or xg to specify GB.
. You can
/var/log
, then , and so
trace-file.1
reaches this size, it is
trace-file.0
. This renaming scheme
239