Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 441

Additional Information
Required Privilege
Level
List of Sample Output
Output Fields
Copyright © 2010, Juniper Networks, Inc.
—(TX Matrix routers only) (Optional) Display kernel dynamic memory usage
scc
information for the TX Matrix router (or switch-card chassis).
sfc number —(TX Matrix Plus routers only) (Optional) Display kernel dynamic memory
usage information for the TX Matrix Plus router (or switch-fabric chassis). Replace
with .
number 0
By default, when you issue the
TX Matrix Plus master Routing Engine, the command is broadcast to all the T640 (in a
routing matrix based on a TX Matrix router) or T1600 (in a routing matrix based on a TX
Matrix Plus router) master Routing Engines connected to it. Likewise, if you issue the
same command on the TX Matrix or TX Matrix Plus backup Routing Engine, the command
is broadcast to all the T640 (in a routing matrix based on a TX Matrix router) or T1600
(in a routing matrix based on a TX Matrix Plus router) backup Routing Engines that are
connected to it.
NOTE: The
show system virtual-memory
option now displays XML output for the command in the parent tags:
<vmstat-memstat-malloc>
, and
<vmstat-intr>
separate XML tag. In Junos OS Releases 10.1 and earlier, the
option for this command does not have an XML API element and the entire
output is displayed in a single
view
show system virtual-memory on page 339
show system virtual-memory scc (TX Matrix Router) on page 343
show system virtual-memory sfc (TX Matrix Plus Router) on page 344
show system virtual-memory | display xml on page 347
Table 66 on page 338 lists the output fields for the
Output fields are listed in the approximate order in which they appear.
Chapter 17: Operational Commands for System Setup
show system virtual-memory
command with the
,
<vmstat-memstat-zone>
with each child element as a
<vmstat-kernel-state>
tag element.
<output>
show system virtual-memory
command on a TX Matrix or
pipe
| display XML
, ,
<vmstat-sumstat>
| display XML
command.
337