hello-authentication-type
Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
hello-authentication-type (md5 | simple);
[edit logical-systems logical-system-name protocols isis interface interface-name level
number],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
isis interface interface-name level number],
[edit protocols isis interface interface-name level number],
[edit routing-instances routing-instance-name protocols isis interface interface-name level
number]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Enable authentication on an interface for hello packets. If you enable authentication on
hello packets, you must specify a password by including the
statement.
By default, hello authentication is not configured on an interface. However, if IS-IS
authentication is configured, the hello packets are authenticated using the IS-IS
authentication type and password.
—Specifies Message Digest 5 as the packet verification type.
md5
simple
—Specifies simple authentication as the packet verification type.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
authentication-key on page 1728
authentication-type on page 1732
hello-authentication-key on page 1806
Configuring Levels on IS-IS Interfaces
Chapter 73: Configuration Statements for Layer 3 Protocols
hello-authentication-key
1807