Ignore-Attached-Bit; Ignore-Lsp-Metrics - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

ignore-attached-bit

Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation

ignore-lsp-metrics

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
1816
®
OS for EX Series Ethernet Switches, Release 10.3
ignore-attached-bit;
[edit logical-systems logical-system-name protocols isis],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
isis],
[edit protocols isis],
[edit routing-instances routing-instance-name protocols isis]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Ignore the attached bit on IS-IS Level 1 routers. Configuring this statement allows the
routing device to ignore the attached bit on incoming Level 1 LSPs. If the attached bit is
ignored, no default route, which points to the routing device which has set the attached
bit, is installed.
The statement is disabled by default.
ignore-attached-bit
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring IS-IS
ignore-lsp-metrics;
[edit logical-systems logical-system-name protocols ospf traffic-engineering shortcuts],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
ospf traffic-engineering shortcuts],
[edit protocols ospf traffic-engineering shortcuts],
[edit routing-instances routing-instance-name protocols ospf traffic-engineering shortcuts]
Statement introduced in Junos OS Release 7.5.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Support for (OSPFv3) introduced in Junos OS Release 9.4.
Support for (OSPFv3) introduced in Junos OS Release 9.4 for EX Series switches.
Ignore RSVP LSP metrics in OSPF traffic engineering shortcut calculations.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Enabling OSPF Traffic Engineering Support
Copyright © 2010, Juniper Networks, Inc.