Figure 65: Viewing The Routing Engine Configuration; Overview Of Vrrp Support In Nsm - Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1 Administration Manual

Table of Contents

Advertisement

Network and Security Manager Administration Guide

Figure 65: Viewing the Routing Engine Configuration

Overview of VRRP Support in NSM

238
Double-click on the configuration group name to show the configuration for the
4.
corresponding Routing Engine.
In the navigation tree, select System. The configured Routing Engine name appears
5.
in the Host Name field.
The VRRP feature allows you to use redundant routers on a LAN by configuring a single
default route on the host. All VRRP routers share the IP address corresponding to the
configured default route. One of the VRRP routers acts as the master and the others are
backups. If the master fails, one of the backup routers becomes the new master, providing
a virtual default router, and ensuring that traffic on the LAN is continuously routed.
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Network and security manager 2010.4

Table of Contents