Local-Address - Juniper JUNOS OS 10.3 - SOFTWARE Manual

For ex series ethernet switches
Hide thumbs Also See for JUNOS OS 10.3 - SOFTWARE:
Table of Contents

Advertisement

local-address

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
local-address address;
[edit logical-systems logical-system-name protocols bgp],
[edit logical-systems logical-system-name protocols bgp group group-name],
[edit logical-systems logical-system-name protocols bgp group group-name neighbor address],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
bgp],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
bgp group group-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
bgp group group-name neighbor address],
[edit protocols bgp],
[edit protocols bgp group group-name],
[edit protocols bgp group group-name neighbor address],
[edit routing-instances routing-instance-name protocols bgp],
[edit routing-instances routing-instance-name protocols bgp group group-name],
[edit routing-instances routing-instance-name protocols bgp group group-name
neighbor address]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Specify the address of the local end of a BGP session. This address is used to accept
incoming connections to the peer and to establish connections to the remote peer. When
none of the operational interfaces are configured with the specified local address, a
session with a BGP peer is placed in the idle state.
If you do not configure a local address, BGP uses the routing device's source address
selection rules to set the local address. For more information, see the Junos Network
Interfaces Configuration Guide.
—IPv6 or IPv4 address of the local end of the connection.
address
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
router-id on page 1957
Enabling BGP
Chapter 73: Configuration Statements for Layer 3 Protocols
1845

Advertisement

Table of Contents
loading

Table of Contents