Juniper JUNOS OS 10.3 - SOFTWARE Manual page 2010

Complete Software Guide for Junos
ppm
Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
1914
®
OS for EX Series Ethernet Switches, Release 10.3
ppm {
no-delegate-processing;
}
[edit logical-systems logical-system-name routing-options],
[edit routing-options]
Statement introduced in Junos OS Release 8.2.
Statement introduced in Junos OS Release 10.2 for EX Series switches.
no-delegate-processing statement introduced in Junos OS Release 9.4.
statement introduced in Junos OS Release 10.2 for EX Series
no-delegate-processing
switches.
(M120, M320, MX Series, T Series, TX Matrix routers, M7i and M10i routers with Enhanced
CFEB [CFEB-E], and EX Series switches only) Disable distributed periodic packet
management (PPM) to the Packet Forwarding Engine (on routers), to access ports (on
EX3200 and EX4200 switches), or line cards (on EX8200 switches).
After you disable PPM, PPM processing continues to run on the Routing Engine.
enabled
—Disable PPM to the Packet Forwarding Engine, access ports,
no-delegate-processing
or line cards. Distributed PPM is enabled by default.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Disabling Distributed Periodic Packet Management on the Packet Forwarding Engine
Configuring Distributed Periodic Packet Management on an EX Series Switch (CLI
Procedure) on page 1697
Copyright © 2010, Juniper Networks, Inc.