Juniper JUNOS OS 10.3 - SOFTWARE Manual page 1927

interface
Syntax
Hierarchy Level
Copyright © 2010, Juniper Networks, Inc.
interface interface-name {
disable;
authentication key <key-id identifier>;
bfd-liveness-detection {
authentication {
algorithm algorithm-name;
key-chain key-chain-name;
loose-check;
}
detection-time {
threshold milliseconds;
}
minimum-interval milliseconds;
minimum-receive-interval milliseconds;
transmit-interval {
threshold milliseconds;
minimum-interval milliseconds;
}
multiplier number;
}
dead-interval seconds;
demand-circuit;
hello-interval seconds;
ipsec-sa name;
interface-type type;
ldp-synchronization {
disable;
hold-time seconds;
}
metric metric;
neighbor address <eligible>;
no-interface-state-traps;
passive;
poll-interval seconds;
priority number;
retransmit-interval seconds;
te-metric metric;
topology (ipv4-multicast | name) {
metric metric;
}
transit-delay seconds;
transmit-interval seconds;
}
[edit logical-systems logical-system-name protocols (ospf | ospf3) area area-id],
[edit logical-systems logical-system-name protocols ospf3 realm (ipv4-unicast |
ipv4-multicast | ipv6-multicast) area area-id],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
(ospf | ospf3) area area-id],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast) area area-id],
[edit protocols (ospf | ospf3) area area-id],
Chapter 73: Configuration Statements for Layer 3 Protocols
1831