Printer Status Messages - Xante Accel-a-Writer 8200 Troubleshooting Manual

8. Close the fuser cover and, if you are not going to use the fold
down tray, close it. Then, resume printing from your application.
Note: Your printer has an automatic jam recovery feature. This
means if the feature is enabled and a multiple page job jams,
as long as you do not turn off the printer to remove the jam,
the printer reprints the jammed page and the rest of the job.
See "The Jam Recovery Menu" in chapter 5 for more details.
Status Messages
Often, you can solve questions by checking the display window on
your printer's front panel for printer status or service messages.

Printer Status Messages

The following messages alert you to the general status of your printer
or to situations which you can solve easily without a long
troubleshooting process or a service call.
Accel-a-Writer
FEED <PAGE SIZE>
FIRST JOB
INITIALIZING
NO EP-CART
_____________________________________
Power to the printer has been turned
on and the printer is coming up to full
power before beginning to initialize.
Manual feed is selected. <PAGE SIZE>
is replaced by the size of the selected
media, such as letter.
The printer is checking to see if there is
an initializing file (such as
STARTPAGE) which needs to be run.
The printer is warming up, performing
setup routines, and getting ready to go
on line.
The toner cartridge is either not in the
printer or not seated in place. Install a
toner cartridge or reseat the current one.
Troubleshooting 10-9