3Com S7906E Configuration Manual page 2116

S7900e family release 6600 series
Hide thumbs Also See for S7906E:
Table of Contents

Advertisement

Run Mode
: Standard
Run Method
: Virtual MAC
Total number of virtual routers : 1
Interface Vlan-interface2
VRID
: 1
Admin Status
: Up
Config Pri
: 100
Preempt Mode
: Yes
Auth Type
: Simple
Virtual IP
: FE80::10
Master IP
: FE80::1
The above information indicates that in VRRP group 1 Switch A is the master, Switch B is the backup
and packets sent from Host A to Host B are forwarded by Switch A.
If interface VLAN-interface 3 on Switch A is not available, you can still ping Host B successfully on Host
A. You can use the display vrrp ipv6 verbose command to view the detailed information of the VRRP
group.
# If interface VLAN-interface 3 on Switch A is not available, the detailed information of VRRP group 1 on
Switch A is displayed.
[SwitchA-Vlan-interface2] display vrrp ipv6 verbose
IPv6 Standby Information:
Run Mode
: Standard
Run Method
: Virtual MAC
Total number of virtual routers : 1
Interface Vlan-interface2
VRID
: 1
Admin Status
: Up
Config Pri
: 110
Preempt Mode
: Yes
Auth Type
: Simple
Virtual IP
: FE80::10
Master IP
: FE80::2
VRRP Track Information:
Track Interface: Vlan3
# If interface VLAN-interface 3 on Switch A is not available, the detailed information of VRRP group 1 on
Switch B is displayed.
[SwitchB-Vlan-interface2] display vrrp ipv6 verbose
IPv6 Standby Information:
Run Mode
: Standard
Run Method
: Virtual MAC
Total number of virtual routers : 1
Interface Vlan-interface2
VRID
: 1
Admin Status
: Up
Config Pri
: 100
1::10
1::10
State : Down
1-43
Adver Timer
: 500
State
: Backup
Running Pri
: 100
Delay Time
: 5
Key
: hello
Adver Timer
: 500
State
: Backup
Running Pri
: 80
Delay Time
: 5
Key
: hello
Pri Reduced : 30
Adver Timer
: 500
State
: Master
Running Pri
: 100

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

S7910eS7906e-vS7903eS7903e-sS7902e

Table of Contents