Configuring An Ftp Test - 3Com S7906E Configuration Manual

Configuring an FTP Test

An FTP test is mainly used to test the connection between the NQA client and a specified FTP server
and the time necessary for the FTP client to transfer a file to or download a file from the FTP server.
Configuration prerequisites
Before an FTP test, you need to perform some configurations on the FTP server. For example, you
need to configure the username and password used to log onto the FTP server. For the FTP server
configuration, refer to File System Management Configuration in the System Volume.
Configuring an FTP test
Follow these steps to configure an FTP test:
To do...
Enter system view
Enter NQA test group view
Configure the test type as FTP
and enter test type view
Configure the destination
address for a test operation
Configure the source IP
address of a probe request
Configure the operation type
Configure a login username
Configure a login password
Specify a file to be transferred
between the FTP server and
the FTP client
Configure common optional
parameters
Use the command...
system-view
nqa entry admin-name
operation-tag
type ftp
destination ip ip-address
source ip ip-address
operation { get | put }
username name
password password
filename file-name
Refer to Configuring Optional
Parameters Common to an
NQA Test Group
1-9
Remarks
—
—
Required
Required
By default, no destination IP
address is configured for a test
operation.
The destination IP address for a
test operation is the IP address of
the FTP server.
Required
By default, no source IP address
is specified.
The source IP address must be
that of an interface on the device
and the interface must be up.
Otherwise, the test will fail.
Optional
By default, the operation type for
the FTP is get, that is, obtaining
files from the FTP server.
Required
By default, no login username is
configured.
Required
By default, no login password is
configured.
Required
By default, no file is specified.
Optional