Restarting An Oap Card - 3Com S7906E Configuration Manual

To do...
Redirect from the switch to the
software system on the OAP card
(distributed device)
Redirect from the switch to the
software system on the OAP card
(distributed IRF device)

Restarting an OAP Card

If the software system of an OAP card works abnormally or is under other anomalies, you can restart the
OAP card with the following command.
Follow the step to restart an OAP card:
To do...
Restart the OAP card (distributed
device)
Restart the OAP card (distributed
IRF device)
Save the configurations of the OAP card before restarting it to avoid service interruption and hardware
data loss.
Use the command...
oap connect slot slot-number
oap connect chassis
chassis-number slot slot-number
Use the command...
oap reboot slot slot-number
oap reboot chassis
chassis-number slot slot-number
1-2
Remarks
Required
Available in user view
Remarks
Required
Available in user view