Configuring Snmp Logging; Introduction To Snmp Logging; Enabling Snmp Logging - 3Com S7906E Configuration Manual

To do...
Configure the maximum size of
an SNMP packet that can be
received or sent by an SNMP
agent
The validity of a USM user depends on the engine ID of the SNMP agent. If the engine ID generated
when the USM user is created is not identical to the current engine ID, the USM user is invalid.

Configuring SNMP Logging

Introduction to SNMP Logging

SNMP logs the Get and Set operations that the NMS performs on the SNMP agent. When the GET
operation is performed, the agent logs the IP address of the NMS, node name of the GET operation and
OID of the node. When the SET operation is performed, the agent logs the IP address of the NMS, node
name of the SET operation, OID of the node, the value configured and the error code and error index of
the SET response. These logs will be sent to the information center, and the level of them is
informational, that is, they are taken as the system prompt information. With parameters for the
information center configured, the output rules for SNMP logs are decided (that is, whether the logs are
permitted to display and the output destinations).
SNMP logs Get requests, Set requests and Set responses, but does not log Get responses.

Enabling SNMP Logging

To do...
Enter system view
Enable SNMP logging
Configure SNMP log output
rules
Use the command...
snmp-agent packet max-size
byte-count
Use the command...
system-view
snmp-agent log { all |
get-operation |
set-operation }
info-center source
{ module-name | default }
channel { channel-number |
channel-name } [ debug { level
severity | state state } * | log
{ level severity | state state } * |
trap { level severity | state
state } * ] *
1-5
Remarks
Optional
1,500 bytes by default.
Remarks
—
Required
Disabled by default.
Optional
By default, SNMP logs are
output to loghost and logfile
only. To output SNMP logs to
other destinations such as the
console or a monitor terminal,
you need to set the output
destinations with this
command.