Ipv4 Acl Step; Effective Period Of An Ipv4 Acl - 3Com S7906E Configuration Manual

3) If the protocol types have the same precedence, look at the source IP address wildcard masks.
Then, compare packets against the rule configured with more zeros in the source IP address
wildcard mask.
4) If the numbers of zeros in the source IP address wildcard masks are the same, look at the
destination IP address wildcard masks. Then, compare packets against the rule configured with
more zeros in the destination IP address wildcard mask.
5) If the numbers of zeros in the destination IP address wildcard masks are the same, look at the
Layer 4 port number ranges, namely the TCP/UDP port number ranges. Then compare packets
against the rule configured with the smaller port number range.
6) If the port number ranges are the same, compare packets against the rule configured first.
Depth-first match for an Ethernet frame header ACL
The following shows how your switch performs depth-first match in an Ethernet frame header ACL:
1) Sort rules by source MAC address mask first and compare packets against the rule configured with
more ones in the source MAC address mask.
2) If two rules are present with the same number of ones in their source MAC address masks, look at
the destination MAC address masks. Then, compare packets against the rule configured with more
ones in the destination MAC address mask.
3) If the numbers of ones in the destination MAC address masks are the same, compare packets
against the one configured first.
The comparison of a packet against an ACL stops once a match is found. The packet is then processed
as per the rule.

IPv4 ACL Step

Meaning of the step
When defining rules in an IPv4 ACL, you do not necessarily assign them numbers; the system can do
this automatically, and the step defines the increment between two neighboring numbers. For example,
with a step of 5, rules are automatically numbered 0, 5, 10, 15, and so on. By default, the step is 5.
Whenever the step changes, the rules are renumbered, starting from 0. For example, if four rules are
numbered 5, 10, 15, and 20 respectively, changing the step from 5 to 2 will cause the rules to be
renumbered 0, 2, 4, and 6.
Benefits of using the step
With the step and rule numbering/renumbering mechanism, you do not need to assign rules numbers
when defining them. The system will assign a newly defined rule a number that is the smallest multiple
of the step bigger than the currently biggest number. For example, with a step of five, if the biggest
number is currently 28, the newly defined rule will get a number of 30. If the ACL has no rule defined
already, the first defined rule will get a number of 0.
Another benefit of using the step is that it allows you to insert new rules between existing ones as
needed. For example, after creating four rules numbered 0, 5, 10, and 15 in an ACL with a step of five,
you can insert a rule numbered 1.

Effective Period of an IPv4 ACL

You can control when a rule can take effect by referencing a time range in the rule.
1-4