3Com S7906E Configuration Manual page 1969

Equipment 802.1X protocol is enabled
CHAP authentication is enabled
Proxy trap checker is disabled
Proxy logoff checker is disabled
EAD quick deploy is disabled
Configuration: Transmit Period
Quiet Period
Supp Timeout
Reauth Period
The maximal retransmitting times
EAD quick deploy configuration:
EAD timeout:
Total maximum 802.1X user resource number is 1024 per slot
Total current used 802.1X resource number is 1
GigabitEthernet2/0/1
802.1X protocol is enabled
Handshake is enabled
Proxy trap checker is
Proxy logoff checker is disabled
The port is an authenticator
Periodic reauthentication is disabled
Authentication Mode is Auto
Port Control Type is Mac-based
802.1X Multicast-trigger is enabled
Mandatory authentication domain: NOT configured
Guest VLAN: NOT configured
Auth-Fail VLAN: NOT configured
Max number of on-line users is 256
EAPOL Packet: Tx 16331, Rx 102
Sent EAP Request/Identity Packets : 16316
EAP Request/Challenge Packets: 6
EAP Success Packets: 4, Fail Packets: 5
Received EAPOL Start Packets : 6
EAPOL LogOff Packets: 2
EAP Response/Identity Packets : 80
EAP Response/Challenge Packets: 6
Error Packets: 0
1. Authenticated user : MAC address: 0002-0000-0011
Controlled User(s) amount to 1
In addition, as NTK is enabled, frames with unknown destination MAC addresses, multicast addresses,
and broadcast addresses should be discarded.
30 s, Handshake Period
60 s, Quiet Period Timer is disabled
30 s, Server Timeout
3600 s
30m
is link-up
disabled
1-20
15 s
100 s
2