3Com S7906E Configuration Manual page 1934

Figure 1-6 Add an IP address group
# Add a portal device.
Select Portal Service Management > Device from the navigation tree to enter the portal device
configuration page. Then, click Add to enter the page for adding a portal device, as shown in
Type the device name Switch.
Type the IP address of the interface on the switch for connecting the user.
Type the key, which must be the same as that configured on the switch.
Set whether to enable IP address reallocation. Direction portal authentication is used in this
example, and therefore select No from the Reallocate IP drop-down list.
Figure 1-7 Add a portal device
# Associate the portal device with the IP address group.
As shown in Figure 1-8, in the device list on the portal device configuration page, click the icon in the
Port Group Information Management column of device Switch to enter the port group configuration
page.
1-15
Figure 1-7.