3Com S7906E Configuration Manual page 2359

Distributed device
Follow the step below to reboot a device immediately:
To do...
Reboot a card or the whole
system immediately
Follow these steps to enable the scheduled reboot function:
To do...
Enable the scheduled reboot
function of the whole system
and specify a specific reboot
time and date
Enable the scheduled reboot
function of the whole system
and specify a reboot waiting
time
Distributed IRF device
Follow the step below to reboot a device through command lines immediately:
To do...
Reboot a member device
or all IRF member devices
Follow these steps to reboot a device at a time through command lines:
To do...
Enable the scheduled
reboot function and specify
a specific reboot time and
date
Enable the scheduled
reboot function and specify
a reboot waiting time
Use the command...
reboot [ slot slot-number ]
Use the command...
schedule reboot at hh:mm
[ date ]
schedule reboot delay
{ hh:mm | mm }
Use the command...
reboot [ chassis
chassis-number [ slot
slot-number ] ]
Use the command...
schedule reboot at hh:mm
[ date ]
schedule reboot delay
{ hh:mm | mm }
1-4
Remarks
Required
Available in user view.
Remarks
Required
Use either approach.
The scheduled reboot function
is disabled by default.
Available in user view.
Remarks
Required
The chassis keyword specifies a
IRF member device. If it is not
provided, the whole IRF is
specified.
The slot keyword specifies a card
on a member device.
Available in user view.
Remarks
Required
Use either approach.
Disabled by default.
Available in user view.