To do...
Globally
To the control
plane
Display the traffic filtering
configuration
With filter deny configured for a traffic behavior, the other actions (except class-based accounting) in
the traffic behavior do not take effect.
Support of Line Cards for the Traffic Filtering Function
Table 7-1
shows the support of line cards for the traffic filtering action for the inbound and outbound
traffic.
For line card categories and their description, refer to the 3Com S7900E Family Getting Started Guide.
Table 7-1 Support of line cards for the traffic filtering action
Traffic direction (right)
Card category (below)
SC
SA
EA
EB
SD
Traffic Filtering Configuration Example
Traffic Filtering Configuration Example
Network requirements
As shown in
Figure
Configure traffic filtering to filter the packets whose source port is 21 received on GigabitEthernet 2/0/1.
Use the command...
Applying the QoS policy globally
Applying the QoS policy to the control
plane
display traffic behavior
user-defined [ behavior-name ]
Supported
Supported
Supported
Supported
Supported
7-1, Host is connected to GigabitEthernet 2/0/1 of Device.
Inbound
7-2
Remarks
—
—
Optional
Available in any view
Outbound
Supported
Not supported
Not supported
Supported
Supported