3Com S7906E Configuration Manual page 2533

Notification delay: Positive 0, Negative 0 (in seconds)
Reference object:
NQA entry: admin test
Reaction: 1
# Display brief information about active routes in the routing table on Switch A.
[SwitchA] display ip routing-table
Routing Tables: Public
Destinations : 5
Destination/Mask
10.1.1.0/24
10.2.1.0/24
10.2.1.2/32
127.0.0.0/8
127.0.0.1/32
The above information shows that the static route to the next hop 10.2.1.1 is active, and the status of the
track entry is positive. The static route configuration works.
# Remove the IP address of VLAN-interface 3 on Switch B.
<SwitchB> system-view
[SwitchB] interface vlan-interface 3
[SwitchB-Vlan-interface3] undo ip address
# On Switch A, display information about all the Track entries.
[SwitchA] display track all
Track ID: 1
Status: Negative
Notification delay: Positive 0, Negative 0 (in seconds)
Reference object:
NQA entry: admin test
Reaction: 1
# Display brief information about active routes in the routing table on Switch A.
[SwitchA] display ip routing-table
Routing Tables: Public
Destinations : 4
Destination/Mask
10.2.1.0/24
10.2.1.2/32
127.0.0.0/8
127.0.0.1/32
The above information shows that the next hop 10.2.1.1 in the static route for the NQA test group is not
reachable, and the status of the track entry is negative. The static route does not work.
Routes : 5
Proto Pre Cost
Static 60 0
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
Routes : 4
Proto Pre Cost
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
1-42
NextHop Interface
10.2.1.1 Vlan3
10.2.1.2 Vlan3
127.0.0.1 InLoop0
127.0.0.1 InLoop0
127.0.0.1 InLoop0
NextHop Interface
10.2.1.2 Vlan3
127.0.0.1 InLoop0
127.0.0.1 InLoop0
127.0.0.1 InLoop0