To do...
Display the MAC address table
information of one or all VPLS
instances
Display information about
VPLS connections
Display the FIB information of
one or all VPLS instances (on a
distributed device)
Display the FIB information of
one or all VPLS instances (on a
distributed IRF device)
Display information about one
or all VPLS instances
Display information about
remote VPLS connections
Display information about one
or all PW class templates
Clear the MAC address table of
one or all VPLS instances
Resetting VPLS
To do...
Reset a specified or all VPLS
BGP connections
VPLS Configuration Examples
Configuring VPLS Instance
Network requirements
CE 1 and CE 2 are connected to PE 1 and PE 2 respectively through VLANs.
Configure VPLS instance aaa to use LDP (Martini mode) and VPLS instance bbb to use BGP
(Kompella mode), and configure the AS number as 100.
On PE 1 and PE 2: Configure service instance 1000 to match packets that are received on
GigabitEthernet 2/0/1 and carry the VLAN tag of 100 and specify to forward them through VPLS
instance aaa. Configure service instance 2000 to match packets that are received on
GigabitEthernet 2/0/1 and carry VLAN tag of 200 and specify to forward them through VPLS
instance bbb.
Use the command...
display mac-address vsi
[ vsi-name ] [ blackhole |
dynamic | static ] [ count ]
display vpls connection [ bgp
| ldp | vsi vsi-name ] [ block |
down | up ] [ verbose ]
display vpls fib [ vsi vsi-name
[ link link-id ] ] [ slot slot-id ]
[ verbose ]
display vpls fib [ vsi vsi-name
[ link link-id ] ] [ chassis
chassis-number slot slot-id ]
[ verbose ]
display vsi [ vsi-name ]
[ verbose ]
display vsi remote { bgp |
ldp }
display pw-class
[ pw-class-name ]
reset mac-address vsi
[ vsi-name ]
Use the command...
reset bgp vpls { as-number |
ip-address | all | external |
internal }
1-14
Remarks
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in user view
Remarks
Available in user view
Need help?
Do you have a question about the S7906E and is the answer not in the manual?