Support Of Line Cards For Priority Marking - 3Com S7906E Configuration Manual

To do...
Set the drop precedence
for packets
Set the IP precedence for
packets
Set the local precedence
for packets
Set the QoS-local-ID for
packets
Exit behavior view
Create a policy and enter
policy view
Associate the class with
the traffic behavior in the
QoS policy
Exit policy view
To an interface
To online users
Apply the
To a VLAN
QoS
policy
Globally
To the control
plane
Display the priority marking
configuration

Support of Line Cards for Priority Marking

Table 8-1 and Table 8-2
and outbound traffic.
For line card categories and their description, refer to the 3Com S7900E Family Getting Started Guide.
Use the command...
remark drop-precedence
drop-precedence-value
remark ip-precedence
ip-precedence-value
remark local-precedence
local-precedence
remark qos-local-id local-id-value
quit
qos policy policy-name
classifier tcl-name behavior
behavior-name
quit
Applying the QoS policy to an interface
Applying the QoS policy to online users
Applying the QoS policy to a VLAN
Applying the QoS policy globally
Applying the QoS policy to the control
plane
display traffic behavior user-defined
[ behavior-name ]
show the support of line cards for the priority marking actions for the inbound
8-2
Remarks
Optional
Applicable to only the
outbound direction
Optional
Optional
Optional
The QoS-local-ID is used for
identifying services and has
only local significance. By
marking different classes of
traffic with the same QoS
local ID, you can re-classify
them to apply a uniform set
of QoS actions on them.
—
—
—
—
—
—
—
—
—
Optional
Available in any view