3Com S7906E Configuration Manual page 2113

S7900e family release 6600 series
Hide thumbs Also See for S7906E:
Table of Contents

Advertisement

Interface Vlan-interface2
VRID
Admin Status
Config Pri
Preempt Mode
Auth Type
Virtual IP
Master IP
The above information indicates that in VRRP group 1 Switch A is the master, Switch B is the backup
and packets sent from Host A to Host B are forwarded by Switch A.
If Switch A fails, you can still ping through Host B on Host A. You can use the display vrrp ipv6
verbose command to view the detailed information of the VRRP group on Switch B.
# If Switch A fails, the detailed information of VRRP group 1 on Switch B is displayed.
[SwitchB-Vlan-interface2] display vrrp ipv6 verbose
IPv6 Standby Information:
Run Mode
Run Method
Total number of virtual routers : 1
Interface Vlan-interface2
VRID
Admin Status
Config Pri
Preempt Mode
Auth Type
Virtual IP
Virtual MAC
Master IP
The above information indicates that if Switch A fails, Switch B becomes the master, and packets sent
from Host A to Host B are forwarded by Switch B.
VRRP Interface Tracking Configuration Example
Network requirements
Host A needs to access Host B on the Internet, using 1::10/64 as its default gateway.
Switch A and Switch B belong to VRRP group 1 with the virtual IP addresses of 1::10/64 and
FE80::10.
If Switch A operates normally, packets sent from Host A to Host B are forwarded by Switch A; if
VLAN-interface 3 through which Switch A connects to the Internet is not available, packets sent
from Host A to Host B are forwarded by Switch B.
: 1
: Up
: 100
: Yes
: None
: FE80::10
1::10
: FE80::1
: Standard
: Virtual MAC
: 1
: Up
: 100
: Yes
: None
: FE80::10
1::10
: 0000-5e00-0201
: FE80::2
1-40
Adver Timer
: 100
State
: Backup
Running Pri
: 100
Delay Time
: 5
Adver Timer
: 100
State
: Master
Running Pri
: 100
Delay Time
: 5

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

S7910eS7906e-vS7903eS7903e-sS7902e

Table of Contents