Online Help With Command Lines - 3Com S7906E Configuration Manual

Hierarchical command protection where you can only execute the commands at your own or lower
levels. Refer to
Easy access to on-line help by entering "?"
Abundant debugging information for fault diagnosis
Saving and executing commands that have been executed
Fuzzy match for convenience of input. When you execute a command, you can input part of the
characters in a keyword. However, to enable you to confirm your operation, the command can be
executed only when you input enough characters to make the command unique. Take the
commands save, startup saved-configuration, and system-view which start with s as an
example. To save the current configuration, you need to input sa at least; to set the configuration
file for next startup, you need to input st s at least; to enter system view, you need to input sy at
least. You can press Tab to complement the command, or you can input the complete command.

Online Help with Command Lines

The following are the types of online help available with the CLI:
Full help
Fuzzy help
To obtain the desired help information, you can:
1) Enter ? in any view to access all the commands in this view and brief description about them as
well.
<Sysname> ?
User view commands:
archive
backup
boot-loader
bootrom
cd
clock
cluster
copy
debugging
delete
dir
display
......omitted......
2) Enter a command and a ? separated by a space. If ? is at the position of a keyword, all the
keywords are given with a brief description.
<Sysname> terminal ?
debugging Send debug information to terminal
logging Send log information to terminal
monitor Send information output to current terminal
trapping Send trap information to terminal
3) Enter a command and a ? separated by a space. If ? is at the position of a parameter, the
description about this parameter is given.
<Sysname> system-view
[Sysname] interface vlan-interface ?
Configuring Command Aliases
Specify archive settings
Backup next startup-configuration file to TFTP server
Set boot loader
Update/read/backup/restore bootrom
Change current directory
Specify the system clock
Run cluster command
Copy from one file to another
Enable system debugging functions
Delete a file
List files on a file system
Display current system information
for details.
1-19