Configuring An Ssh User - 3Com S7906E Configuration Manual

For information about client side public key configuration and the relevant commands, refer to Public
Key Configuration in the Security Volume.

Configuring an SSH User

This configuration allows you to create an SSH user and specify the service type and authentication
mode.
Follow these steps to configure an SSH user and specify the service type and authentication mode:
To do...
Enter system view
Create an
SSH user, and
specify the
service type
and
authentication
mode
Use the command...
system-view
ssh user username
service-type stelnet
authentication-type
For Stelnet
{ password | { any |
users
password-publickey |
publickey } assign publickey
keyname }
ssh user username
service-type { all | sftp }
authentication-type
For all users { password | { any |
or SFTP users password-publickey |
publickey } assign publickey
keyname work-directory
directory-name }
—
Required
Use either command.
1-8
Remarks