Configuring WFQ Queuing
Configuring SP+WRR Queues
Per-Queue Hardware Congestion Management
Configuring SP Queuing
Configuration procedure
Follow these steps to configure SP queuing:
To do...
Enter system view
Enter
Enter
interface
interface
view
view or port
Enter port
group view
group view
Configure SP queuing
Display SP queuing
configuration
Configuration example
1)
Network requirements
Configure GigabitEthernet 2/0/1 to use SP queuing.
2)
Configuration procedure
# Enter system view
<Sysname> system-view
# Configure GigabitEthernet2/0/1 to use SP queuing.
[Sysname]interface gigabitethernet 2/0/1
[Sysname-GigabitEthernet2/0/1] qos sp
Configure WRR Queuing
Configuration procedure
Follow these steps to configure group-based WRR queuing:
To do...
Enter system view
Task
Use the command...
system-view
interface interface-type
interface-number
port-group manual
port-group-name
qos sp
display qos sp interface
[ interface-type
interface-number ]
Use the command...
system-view
Optional
Optional
—
Use either command
Settings in interface view take effect
on the current interface; settings in
port group view take effect on all
ports in the port group.
Optional
The default queuing algorithm on an
interface is SP queuing.
Optional
Available in any view
5-5
Remarks
Remarks
Remarks
—