Displaying And Maintaining Ipv6 Acls; Ipv6 Acl Configuration Example - 3Com S7906E Configuration Manual

To do...
Copy an existing IPv6 ACL to
generate a new one of the
same type
The source IPv6 ACL and the destination IPv6 ACL must be of the same type.
The generated IPv6 ACL does not take the name of the source IPv6 ACL.

Displaying and Maintaining IPv6 ACLs

To do...
Display configuration
matching information of one or
all IPv6 ACLs
device)
Display configuration
matching information of one or
all IPv6 ACLs (distributed IRF
device)
Display information about ACL
uses of a switch
Display information about ACL
uses of a switch (distributed IRF
device)
Display the configuration and
status on time range
Clear statistics about a specified
or all IPv6 ACLs that are
referenced by
software

IPv6 ACL Configuration Example

Network Requirements
As shown in Figure
Configure an ACL to deny access of the R&D department to external networks.
Use the command...
acl ipv6 copy
{ source-acl6-number | name
source-acl6-name } to
{ dest-acl6-number | name
dest-acl6-name }
and
display acl ipv6 { acl6-number | all |
(distributed name acl6-name } [ slot slot-number ]
and
display acl ipv6 { acl6-number | all |
name
chassis-number slot slot-number ]
display
slot-number ]
display
chassis-number slot slot-number ]
display time-range { time-range-name
| all }
reset acl ipv6 counter { acl6-number |
upper layer all | name acl6-name }
3-1, a company interconnects its departments through the switch.
Use the command...
acl6-name } [ chassis
acl resource [
acl resource [ chassis
3-5
Remarks
Required
Remarks
Available in any view
Available in any view
slot
Available in any view
Available in any view
Available in any view
Available in user view