3Com S7906E Configuration Manual page 2425

Figure 1-2 Network diagram for RMON
Configuration procedure
# Configure RMON to gather statistics for interface GigabitEthernet 2/0/1 periodically.
<Sysname> system-view
[Sysname] interface GigabitEthernet 2/0/1
[Sysname-GigabitEthernet2/0/1] rmon history 1 buckets 8 interval 60 owner user1
After the above configuration, the system gathers statistics on packets received on GigabitEthernet
2/0/1 periodically: the statistical interval is 1 minute, and statistics of the last 8 times are saved in the
history statistics table. You can view the statistics in any of the following ways:
View the history statistics of the interface with the display command.
[Sysname-GigabitEthernet2/0/1] display rmon history
HistoryControlEntry 2 owned by null is VALID
Samples interface
Sampling interval
Sampled values of record 1 :
dropevents
packets
multicast packets : 6
undersize packets : 0
fragments
collisions
Sampled values of record 2 :
dropevents
packets
multicast packets : 6
undersize packets : 0
fragments
collisions
Sampled values of record 3 :
dropevents
packets
multicast packets : 6
undersize packets : 0
fragments
collisions
Sampled values of record 4 :
dropevents
: GigabitEthernet2/0/1<ifIndex.19>
: 10(sec) with 8 buckets max
: 0 , octets
: 8 , broadcast packets
, CRC alignment errors : 0
, oversize packets
: 0 , jabbers
: 0 , utilization
: 0 , octets
: 10 , broadcast packets
, CRC alignment errors : 0
, oversize packets
: 0 , jabbers
: 0 , utilization
: 0 , octets
: 8 , broadcast packets
, CRC alignment errors : 0
, oversize packets
: 0 , jabbers
: 0 , utilization
: 0 , octets
1-8
: 834
: 1
: 0
: 0
: 0
: 962
: 3
: 0
: 0
: 0
: 830
: 0
: 0
: 0
: 0
: 933