Configuring A Udp Echo Test - 3Com S7906E Configuration Manual

Configuring a UDP Echo Test

A UDP echo test is used to test the connectivity and roundtrip time of a UDP echo packet from the client
to the specified UDP port on the NQA server.
Configuration prerequisites
A UDP echo test requires cooperation between the NQA server and the NQA client. The UDP listening
function needs to be configured on the NQA server before the UDP echo test. For the configuration of
the UDP listening function, refer to
Configuring a UDP echo test
Follow these steps to configure a UDP echo test
To do...
Enter system view
Enter NQA test group view
Configure the test type as UDP
echo and enter test type view
Configure the destination
address for a test operation
Configure the destination port
Configure the size of probe
packets sent
Configure the filler string of a
probe packet sent
Specify a source port number
for a probe request in a test
operation
Configuring the NQA Server.
Use the command...
system-view
nqa entry admin-name
operation-tag
type udp-echo
destination ip ip-address
destination port port-number
data-size size
data-fill string
source port port-number
1-15
Remarks
—
—
Required
Required
By default, no destination IP
address is configured for a test
operation.
The destination address must
be the IP address of the
listening service configured on
the NQA server.
Required
By default, no destination port
number is configured for a test
operation.
The destination port number
must be the port number of the
listening service configured on
the NQA server.
Optional
100 bytes by default.
Optional
By default, the filler string of a
probe packet is the
hexadecimal number
00010203040506070809.
Optional
By default, no source port
number is specified.