3Com S7906E Configuration Manual page 2287

Figure 2-1 Diagram for setting the connection to the Console port
If you use a PC to connect to the Console port, launch a terminal emulation utility (such as Terminal
in Windows 3.X or HyperTerminal in Windows 9X/Windows 2000/Windows XP) and perform the
configuration shown in
the parameters of a terminal are configured as those listed in
Figure 2-2 Create a connection
Figure 2-3 Specify the port used to establish the connection
Figure 2-2 through Figure 2-4
2-2
for the connection to be created. Normally,
Table 2-1.