Configuring Local User Attributes - 3Com S7906E Configuration Manual

Configuring Local User Attributes

For local authentication, you need to create local users and configure user attributes on the device as
needed.
A local user represents a set of user attributes configured on a device and is uniquely identified by the
username. For a user requesting a network service to pass local authentication, you must add an entry
as required in the local user database of the device.
Each local user belongs to a local user group and bears all attributes of the group, such as the
authorization attributes. For details about local user group, refer to
You can configure an authorization attribute in user group view or local user view, making the attribute
effective on all local users of the group or only the local user. An authorization attribute configured in
local user view takes precedence over the same attribute configured in user group view.
Follow these steps to configure the attributes for a local user:
To do...
Enter system view
Set the password display mode for
all local users
Add a local user and enter local
user view
Configure a password for the local
user
Place the local user to the state of
active or blocked
Set the maximum number of user
connections using the local user
account
Specify the service types for the
local user
Configure the binding attributes for
the local user
Use the command...
system-view
local-user
password-display-mode { auto
| cipher-force }
local-user user-name
password { cipher | simple }
password
state { active | block }
access-limit max-user-number
service-type { ftp | lan-access |
{ ssh | telnet | terminal } * |
portal }
bind-attribute { call-number
call-number [ : subcall-number ] |
ip ip-address | location port
slot-number subslot-number
port-number | mac mac-address
| vlan vlan-id } *
1-21
Configuring User Group
Remarks
—
Optional
auto by default, indicating
to display the password of
a local user in the way
indicated by the password
command.
Required
No local user exists by
default.
Optional
Optional
When created, a local user
is in the state of active by
default, and the user can
request network services.
Optional
By default, there is no limit
on the maximum number of
user connections using the
same local user account.
Optional
By default, no service is
authorized to a local user.
Optional
By default, no binding
attribute is configured for a
local user.
Attributes.