Configuring Cli Hotkeys - 3Com S7906E Configuration Manual

To do...
Configure the authorization
information before login
Configure the banner to be
displayed when a user enters
user view (non Modem login
users)
Configure the banner to be
displayed before login

Configuring CLI Hotkeys

Follow these steps to configure CLI hotkeys:
To do...
Enter system view
Configure CLI hotkeys
Display hotkeys
By default, the Ctrl+G, Ctrl+L and Ctrl+O hotkeys are configured with command line and the Ctrl+T
and Ctrl+U commands are NULL.
Ctrl+G corresponds to the display current-configuration command.
Ctrl+L corresponds to the display ip routing-table command.
Ctrl+O corresponds to the undo debugging all command.
Table 1-2 Hotkeys reserved by the system
Hotkey
Ctrl+A
Ctrl+B
Ctrl+C
Ctrl+D
Ctrl+E
Ctrl+F
Ctrl+H
Ctrl+K
Use the command...
header legal text
header shell text
header motd text
Use the command...
system-view
hotkey { CTRL_G | CTRL_L |
CTRL_O | CTRL_T | CTRL_U }
command
display hotkey
Moves the cursor to the beginning of the current line.
Moves the cursor one character to the left.
Stops performing a command.
Deletes the character at the current cursor position.
Moves the cursor to the end of the current line.
Moves the cursor one character to the right.
Deletes the character to the left of the cursor.
Terminates an outgoing connection.
Optional
Optional
Optional
—
Optional
The Ctrl+G, Ctrl+L and Ctrl+O
hotkeys are specified with
command lines by default.
Available in any view. Refer to
Table 1-2
by the system.
Function
1-8
Remarks
Remarks
for hotkeys reserved