3Com S7906E Configuration Manual page 1796

VLAN
With or without
operation
mode
With VLAN tag
Translation
mode
Without VLAN tag
Follow these steps to configure uplink traffic classification and priority remarking for a UNI:
To do...
Enter system view
Enter ONU port view
Configure uplink traffic
priority remarking for a
UNI
Currently, up to eight rules can be configured for each UNI port on an H3C ONU.
VLAN tag
Case 1: The VLAN ID in the VLAN tag matches a VLAN
translation entry on the port. The VLAN ID is replaced with the
VLAN ID corresponding to the entry, and then:
If
classification rule, the packet is priority-remarked with
the value specified in the rule and is then forwarded;
Otherwise, the packet is directly forwarded.
Case 2: The VLAN ID in the tag is the default VLAN ID of the
port:
If
classification rule, the packet is priority-remarked with
the value specified in the rule and is then forwarded;
Otherwise, the packet is directly forwarded.
Case 3: The VLAN ID in the tag does not match any VLAN
translation entry on the port. The packet is dropped.
The packet is tagged with the VLAN tag corresponding to the
default PVID of the port, and then:
If
classification rule, the packet is priority-remarked with
the value specified in the rule and is then forwarded;
Otherwise, the packet is remarked with the port
priority and is then forwarded.
Use the command...
system-view
interface interface-type interface-number
uni uni-number classification-marking index index
queue qid priority priority { selector operator
matched-value } &<1-4>
11
Packet processing
the packet matches
the packet matches
the packet matches
the configured traffic
the configured traffic
the configured traffic
Remarks
—
—
Required