Binding The Vpls Instance - 3Com S7906E Configuration Manual

To do...
Create a BGP VPLS instance
and enter VSI view
Specify BGP as the PW
signaling protocol and enter
VSI BGP view
Configure an RD for the VPLS
instance
Configure VPN targets for the
VPLS instance
Create a site for the VPLS
instance

Binding the VPLS Instance

You can Binding a Layer 2 Ethernet interface and a VLAN interface with the VPLS instance. After you
configure such a binding, the VPLS connection services packets that carry the specified VLAN tag and
are received on the specified Layer 2 Ethernet interface.
Configuration prerequisite
Configuring the VPLS instance.
Configuration procedure
To bind a Layer 2 Ethernet interface and one or more VLANs with a VPLS instance, you need to create
a service instance on the Layer 2 Ethernet interface, configure a packet matching rule for the service
instance, and bind the service instance with the VPLS instance. After these configurations, packets that
arrive at the Layer 2 Ethernet interface and match the packet matching rule will be forwarded through
the bound VPLS instance.
Follow these steps to bind a Layer 2 Ethernet interface and one or more VLANs with a VPLS instance:
To do...
Enter system view
Enter the view of the interface
connecting a CE
Create a service instance and
enter its view
Configure a packet matching
rule for the service instance
Use the command...
vsi vsi-name auto
pwsignal bgp
route-distinguisher
route-distinguisher
vpn-target vpn-target&<1-16>
[ both | import-extcommunity
| export-extcommunity ]
site site-id [ range site-range ]
[ default-offset { 0 | 1 } ]
Use the command...
system-view
interface interface-type
interface-number
service-instance
service-instance-id
encapsulation s-vid vlan-id
1-12
Remarks
Required
Required
Required
Required
Required
Remarks
—
—
Required
By default, no service instance
is created.
Required
By default, no packet matching
rule is configured for a service
instance.