Enabling A User Profile; Displaying And Maintaining User Profile - 3Com S7906E Configuration Manual

If a user profile is active, the QoS policy, except ACLs referenced in the QoS policy, applied to it
cannot be configured or removed. If the user profile is being used by online users, the referenced
ACLs cannot be modified either.
The QoS policies applied in user profile view support only the remark, car, and filter actions.
Do not apply an empty policy in user profile view because a user profile with an empty policy
applied cannot be activated.

Enabling a User Profile

A created user profile takes effect only after being enabled.
Follow these steps to enable a user profile:
To do...
Enter system view
Enable a user profile
Only an enabled user profile can be used by a user. You cannot modify or remove the configuration
items in a user profile until the user profile is disabled.
Disabling a user profile logs out the users using the user profile.

Displaying and Maintaining User Profile

To do...
Display information about all
the created user profiles
Use the command...
system-view
user-profile profile-name
enable
Use the command...
display user-profile
1-3
Remarks
—
Required
A user profile is disabled by
default.
Remarks
Available in any view