Outputting System Information To The Log Buffer - 3Com S7906E Configuration Manual

To do...
Configure the channel through
which system information can
be output to the trap buffer and
specify the buffer size
Configure the output rules of
the system information
Configure the format of the time
stamp

Outputting System Information to the Log Buffer

You can configure to output log, trap, and debugging information to the log buffer, but the log buffer
receives the log and debugging information only, and discards the trap information.
To do...
Enter system view
Enable information center
Name the channel with a
specified channel number
Configure the channel through
which system information can
be output to the log buffer and
specify the buffer size
Configure the output rules of
the system information
Use the command...
info-center trapbuffer
[ channel { channel-number |
channel-name } | size
buffersize ] *
info-center source
{ module-name | default }
channel { channel-number |
channel-name } [ debug { level
severity | state state } * | log
{ level severity | state state } * |
trap { level severity | state
state } * ] *
info-center timestamp
{ debugging | log | trap }
{ boot | date | none }
Use the command...
system-view
info-center enable
info-center channel
channel-number name
channel-name
info-center logbuffer
[ channel { channel-number |
channel-name } | size
buffersize ] *
info-center source
{ module-name | default }
channel { channel-number |
channel-name } [ debug { level
severity | state state } * | log
{ level severity | state state } * |
trap { level severity | state
state } * ] *
1-11
Remarks
Optional
By default, system information
is output to the trap buffer
through channel 3 (known as
trapbuffer) and the default
buffer size is 256.
Optional
Refer toDefault Output Rules of
System Information.
Optional
The time stamp format for log,
trap and debugging information
is date by default.
Remarks
—
Optional
Enabled by default.
Optional
Refer to Table 1-2 for default
channel names.
Optional
By default, system information
is output to the log buffer
through channel 4 (known as
logbuffer) and the default buffer
size is 512.
Optional
Refer toDefault Output Rules of
System Information.